SCB11 epoxy cast dry-type transformer is safe, flame retardant, non-polluting and can be installed directly in the load center. Maintenance-free and easy to install. Good moisture-proof performance, it can be put into operation without pre-drying after shutdown. Low loss, low local discharge, low noise, forced air cooling conditions can be 120% rated load operation. It has a perfect temperature protection control system to provide reliable guarantee for the safe operation of the transformer. The reliability index of this product has reached the domestic advanced level.
Product introduction
SCB11 epoxy cast dry-type transformer is safe, flame retardant, non-polluting and can be installed directly in the load center. Maintenance-free and easy to install. Good moisture-proof performance, it can be put into operation without pre-drying after shutdown. Low loss, low local discharge, low noise, forced air cooling conditions can be 120% rated load operation. It has a perfect temperature protection control system to provide reliable guarantee for the safe operation of the transformer. The reliability index of this product has reached the domestic advanced level.
The temperature control system consists of a temperature controller and a PTC temperature measuring element installed at the top end of the low-voltage winding, which is the most hot spot of the product, to realize the temperature measurement and control of the transformer. If the temperature of the transformer winding is too high due to overload operation or fault, the temperature controller will send an alarm signal, and the temperature will trip by itself when it exceeds the safe value. When forced air cooling is used, the temperature controller determines the input or switch of the cooling fan according to the winding temperature.
The temperature display system directly displays the hot spot temperature of the winding during the operation of the transformer, and can be used together with the temperature control system.
The temperature control and temperature display system can be installed at a certain distance from the main body of the transformer, and the length of the lead wire of the temperature measuring element is:
Temperature control: <20m
Temperature display: <10 m (two-wire system)
<100m (two-wire system with compensating wire)
Characteristics of the product
scb11 dry transformer features
1. Safe, not easy to burn, fire can be installed directly in the load center;
2. Maintenance-free, easy installation, low economic operating cost;
3. Good moisture resistance, can operate normally under 100% humidity;
4. Low loss, low noise, good insulation, small local discharge, no pollution, loss
5. Good heat dissipation, strong overload capacity, under the condition of air cooling, it can exceed the load by 50%;
6. Reliable operation, a perfect temperature protection control system, can ensure the safe operation of the transformer;
7. Small size, light weight, stable structure, strong lightning impact resistance, high mechanical strength, strong resistance to temperature change and sudden short circuit resistance.
Product parameter
Type 116kV,10kV dry-type none-excitation distribution transformers with Tap-changer Technical Data Sheet1
| Type |
Connection group
symbol |
Voltage
combination (kV) |
Non-load
current (%) |
Non-load loss
(M) |
Load lossw |
Short-circuit mpedance(%) |
| B(100ºC) |
F(120ºC) |
H(145ºC) |
| SC11-30 |
YynO
Dyn11 |
6~11±2×2.5% /0.4 |
1.9 |
170 |
670 |
710 |
760 |
4.0 |
| SC11-50 |
1.9 |
240 |
940 |
1000 |
1070 |
4.0 |
| SC11-80 |
1.5 |
330 |
1290 |
1380 |
1480 |
4.0 |
| SC11-100 |
1.5 |
360 |
1480 |
1570 |
1690 |
4.0 |
| SC11-125 |
1.3 |
420 |
1740 |
1850 |
1980 |
4.0 |
| SC11-160 |
1.3 |
480 |
2000 |
2130 |
2280 |
4.0 |
| SC11-200 |
1.1 |
550 |
2370 |
2530 |
2710 |
4.0 |
| SC11-250 |
1.1 |
640 |
2590 |
2760 |
2960 |
4.0 |
| SC11-315 |
1.0 |
790 |
3270 |
3470 |
3730 |
4.0 |
| SC(B)11-400 |
1.0 |
880 |
3750 |
3990 |
4280 |
4.0 |
| SC(B)11-500 |
0.9 |
040 |
4590 |
4880 |
5230 |
4.0 |
| SC(B)11-630 |
0.9 |
1200 |
5530 |
5880 |
6290 |
4.0 |
| SC(B)11-630 |
0.9 |
1170 |
5610 |
5960 |
6400 |
6.0 |
| SC(B)11-800 |
0.8 |
1360 |
6550 |
6960 |
7460 |
6.0 |
| SC(B)11-1000 |
0.8 |
1590 |
7650 |
8130 |
8760 |
6.0 |
| SC(B)11-1250 |
0.8 |
1880 |
9100 |
9690 |
10370 |
6.0 |
| SC(B)11-1600 |
0.7 |
2200 |
11050 |
11730 |
12580 |
6.0 |
| SC(B)11-2000 |
0.6 |
2740 |
13600 |
14450 |
15560 |
6.0 |
| SC(B)11-2500 |
0.6 |
3240 |
16150 |
17170 |
18450 |
6.0 |
| SCB11-1600 |
0.7 |
2200 |
12280 |
12960 |
13900 |
8.0 |
| SCB11-2000 |
0.6 |
2740 |
15020 |
15960 |
17110 |
8.0 |
| SCB11-2500 |
0.6 |
3240 |
17760 |
18890 |
20290 |
8.0 |
Shell protection device
Shell is made of stainless steel or aluminum alloy.Protection grade can reach IP20 and IP23.IP20 housing can prevent solid foreign objects of diameter more than 12mm enter into and protect the transformer safely.IP23 housing
can prevent the vertical drop of less than 60°of flow,suits for outdoor operation.
Note:IP23 housing can make the transformer cool,small capacity is decreased by about 5%,high-capacity is decreased by about 10%,
Application scenario
Resin cast dry transformers are widely used in various fields, such as high-rise buildings, power substations, petroleum, chemical and so on. Among them, for high-rise buildings, because it has the advantages of small size, light weight, low noise, and does not require special ventilation and heat dissipation conditions, it has become a popular transformer on the market.
In addition, resin cast dry transformer is also widely used in the petroleum and chemical industry, its anti-corrosion, explosion-proof and other characteristics, can work for a long time in a special environment.
Product details
Shandong Zhifeng Transformer Co., Ltd. is located in the North Rainbow Industrial Park, East Second Ring Road, Linqing City, Shandong Province, a famous canal city, with convenient transportation and beautiful environment. The company covers an area of 45,000 square meters, is a collection of 35KV and below oil-immersed transformer, dry transformer, special transformer, grounding transformer, arc suppression coil, reactor, box-type substation, American box transformer, all kinds of box production, sales, research and development in one of the professional power equipment manufacturing enterprises.
The company strictly in accordance with the ISI9001 quality system operating standards management. The technology of computer aided integrated design is adopted. Combined with the characteristics of the regional environment to design professional products that meet the needs of customers to ensure the high quality of products. The company has: comprehensive performance test bench, high performance voltage withstand equipment, program control frequency conversion power supply, insulation oil chromatograph, acid value tester, insulation oil dielectric strength tester, oil dielectric loss tester and other advanced inspection and testing equipment. Using vacuum drying equipment, digital winding machine, laser cutting line and other superior production equipment. Advanced product technology, complete testing equipment. There are more than 100 employees, including 5 senior engineers and 18 senior technical personnel.
Shandong Zhifeng Transformer Co., Ltd. adheres to the concept of "sincere to the letter, brave to climb the peak", and takes customer satisfaction as the service purpose; We are committed to providing high quality, safe, energy saving and environmentally friendly power products for global power users.
The transformer produced by the company has outstanding quality, excellent price and excellent after-sales service. We will strive for excellence, create more excellent products, and look forward to sincere cooperation with new and old customers.
Frequently asked question
Q: Are you a manufacturer, factory or trading company?
A: Yes, we have been engaged in the development, production and operation of transformers for more than 15 years.
Q: What is your warranty?
A: We offer a 12-month warranty.
Q: Production time?
A: 30 to 45 days or depending on order requirements.
Q: What are your payment terms?
A: T/T, L/C or negotiation.
Q: How does your factory conduct quality control?
A: We carry out 100% QC inspection to ensure that every product is qualified. From raw material to final product manufacturing process, we have more than 10 QC inspections.
Q: Do you have any products in stock?
A: Not normally. All our products are manufactured according to your order quantity.
Q: What does a custom transformer need to provide?
A: Technical drawings and technical specification documents are best, or you can tell us some detailed technical specification dates below "Quote and order required information".
Q: Can I have a catalogue and price list for my MOQ trial order?
A: All of our products are made in China or displayed on the official website, you are always welcome to ask us directly for more information.
){kind=link}