The SC(B)12-10 resin insulated dry power transformer from Shandong Zhifeng Transformer Co., Ltd. epitomizes unparalleled craftsmanship, engineered to excel in challenging environments such as wind farms, photovoltaic power stations, EV charging stations, integrated substations, and advanced power distribution systems. Performance Characteristics: Exceptional Energy Efficiency:Witness substantial energy savings with over a 10% reduction in no-load loss compared to SCB11 models, ensuring cost-effective operation and maintenance-free service. Whisper-Quiet Operation:Painstakingly designed to meet the highest standards for noise reduction, delivering serene operation coupled with exceptional efficiency.
Product Introduction
The SCB11 epoxy cast dry-type transformer redefines safety and reliability. This eco-friendly, flame-retardant transformer can be directly installed at the load center. Its maintenance-free, user-friendly design offers superior moisture resistance, allowing for immediate operation post-shutdown without pre-drying. Key Features: low loss, minimal local discharge, reduced noise levels, and the capability to operate at 120% rated load under forced air cooling. An advanced temperature protection control system ensures safe, reliable performance, adhering to domestic advanced standards of reliability.
The advanced temperature control system features a temperature controller and a PTC temperature measuring element located at the hottest point of the low-voltage winding. This system precisely monitors and regulates the transformer's temperature. In case of overheating due to overload or fault conditions, the controller triggers an alarm and automatically disconnects if the temperature exceeds safety thresholds. During forced air cooling, the temperature controller adjusts the cooling fan based on the winding temperature.
The temperature display system offers real-time visibility of the winding's hot spot temperature during transformer operation, seamlessly integrating with the temperature control system for enhanced monitoring.
The temperature control and display systems offer versatile installation options, including remote setup from the main transformer body. The length of the temperature measuring element's lead wire is:
Temperature Control:<20m
Temperature Display:<10 m (two-wire system)
<100m (two-wire system with compensating wire)
Performance Characteristics
> **Exceptional Energy Efficiency:** Achieve impressive energy savings with over a 10% reduction in no-load loss compared to SCB11 models, offering remarkable economic operation and maintenance-free performance.
> **Whisper-Quiet Operation:** Noise levels are significantly reduced by 10-15 dB, surpassing the JB/T10088-1999 standard for 6-220KV transformers.
> **Minimal Discharge:** Advanced stirring and vacuum film degassing technologies eliminate bubbles in the resin mixture, ensuring local discharge power remains below 5PC.
> **Eco-Friendly and Flame Retardant:** High and low-pressure coils are vacuum cast, forming a dense, solidified structure that is flame-retardant, explosion-proof, and environmentally safe. High heat resin produces no toxic gases.
No toxic gases.
> **Superior Electrical Strength:** Vacuum-poured high and low-voltage coils provide excellent insulation, arc resistance, and moisture resistance. They withstand atmospheric overvoltage, operational voltage, transient overvoltage, and long-term operating voltage, showcasing robust power frequency voltage resistance.
Electrical strength against voltage, transient overvoltage, and long-term operational voltage. The power frequency voltage resistance is exceptionally robust.
> **High Heat Resistance:** Encapsulated in a thin layer of epoxy resin, the high and low voltage coils offer substantial thermal conductivity and insulation heat resistance up to grade H, ensuring superior heat resistance.
Product Parameters
Type 126kV, 10kV dry-type non-excitation distribution transformers with Tap-changer Technical Data Sheet
Sheet
| Type |
Connection group
symbol |
Voltage combination
(kV) |
Non-load current (%) |
Non-load loss
(W) |
Load loss W |
Short-circuit impedance (%) |
| B(100ºC) |
F(120ºC) |
H(145°ºC) |
| SC12-30 |
Yyn0
Dyn11 |
6~11±2×2.5% /0.4 |
2.4 |
150 |
670 |
710 |
760 |
4.0 |
| SC12-50 |
2.4 |
215 |
940 |
1000 |
1070 |
4.0 |
| SC12-80 |
1.8 |
295 |
1290 |
1380 |
1480 |
4.0 |
| SC12-100 |
1.8 |
320 |
1480 |
1570 |
1690 |
4.0 |
| SC12-125 |
1.6 |
375 |
1740 |
1850 |
1980 |
4.0 |
| SC12-160 |
1.6 |
430 |
2000 |
2130 |
2280 |
4.0 |
| SC12-200 |
1.4 |
495 |
2370 |
2530 |
2710 |
4.0 |
| SC12-250 |
1.4 |
575 |
2590 |
2760 |
2960 |
4.0 |
| SC12-315 |
1.2 |
705 |
3270 |
3470 |
3730 |
4.0 |
| SC(B)12-400 |
1.2 |
785 |
3750 |
3990 |
4280 |
4.0 |
| SC(B)12-500 |
1.0 |
930 |
4590 |
4880 |
5230 |
4.0 |
| SC(B)12-630 |
1.0 |
1070 |
5530 |
5880 |
6290 |
4.0 |
| SC(B)12-630 |
1.0 |
1040 |
5610 |
5960 |
6400 |
6.0 |
| SC(B)12-800 |
1.0 |
1215 |
6550 |
6960 |
7460 |
6.0 |
| SC(B)12-1000 |
1.0 |
1415 |
7650 |
8130 |
8760 |
6.0 |
| SC(B)12-1250 |
1.0 |
1670 |
9100 |
9690 |
10370 |
6.0 |
| SC(B)12-1600 |
1.0 |
1960 |
11050 |
11730 |
12580 |
6.0 |
| SC(B)12-2000 |
08 |
2440 |
13600 |
14450 |
15560 |
6.0 |
| SC(B)12-2500 |
08 |
2880 |
16150 |
17170 |
18450 |
6.0 |
| SCB12-1600 |
1.0 |
1960 |
12280 |
12960 |
13900 |
8.0 |
| SCB12-2000 |
08 |
2440 |
15020 |
15960 |
17110 |
8.0 |
| SCB12-2500 |
0.8 |
2880 |
17760 |
18890 |
20290 |
8.0 |
ShellProtectionDevice
The shell of our resin cast high voltage transformers is masterfully constructed from robust stainless steel or aluminum alloy, achieving an exemplary protection grade of IP20 and IP23. The IP20 housing ensures the transformer is safeguarded from solid foreign objects larger than 12mm in diameter, facilitating safe and reliable operation. The IP23 housing provides superior protection against water spray at an angle of up to 60° from the vertical, making it perfectly suited for outdoor applications. This dual protection fortifies the transformer's longevity and performance, even under demanding environmental conditions.
Engineered to withstand vertical drops of up to 60°, our product stands as the quintessential choice for rigorous outdoor operations. This resilience ensures unmatched reliability and performance, enabling the transformer to operate seamlessly in the most challenging and extreme conditions. Whether dealing with adverse weather or complex terrains, our product delivers consistent, high-caliber performance.
Note: The IP23 housing excels in cooling the transformer. For units with smaller capacity, there may be an approximate 5% reduction in cooling efficiency, while units with larger capacity might experience a decrease of around 10%. This ensures optimal performance across various capacities, maintaining operational effectiveness while adapting to specific cooling needs.
Product Details
Situated in the scenic North Rainbow Industrial Park on East Second Ring Road, Linqing City, Shandong Province, Shandong Zhifeng Transformer Co., Ltd. spans an impressive 45,000 square meters. We excel in the production, sales, research, and development of 35KV and below oil-immersed transformers, dry transformers, special transformers, grounding transformers, arc suppression coils, reactors, box-type substations, American box transformers, and an array of other power equipment. Our strategic location offers convenient transportation and a picturesque environment, establishing us as a premier power equipment manufacturing enterprise.
Conforming rigorously to ISO9001 quality system standards, Shandong Zhifeng Transformer Co., Ltd. integrates advanced computer-aided design technology with regional environmental attributes to craft bespoke products tailored to customer specifications. Our state-of-the-art facilities feature comprehensive performance test benches, high-performance voltage withstand equipment, programmable frequency conversion power supplies, insulation oil chromatographs, acid value testers, insulation oil dielectric strength testers, oil dielectric loss testers, and more. Our production capabilities are further enhanced by vacuum drying equipment, digital winding machines, and laser cutting lines. With a dedicated team of over 100 employees, including 5 senior engineers and 18 senior technical personnel, we ensure superior product quality and rigorous testing protocols.
Guided by the tenets of integrity and peak performance, Shandong Zhifeng Transformer Co., Ltd. is committed to delivering high-quality, safe, energy-efficient, and eco-friendly power products to global power users. Customer satisfaction remains our supreme service objective, guiding every aspect of our operations and product offerings.
Our transformers are distinguished by their superior quality, competitive pricing, and exemplary after-sales service. We strive for excellence in every product and eagerly anticipate forging sincere collaborations with both new and longstanding customers. Our commitment to quality and customer satisfaction is unwavering, ensuring that our products consistently exceed expectations.
Frequently Asked Questions
Q: Are you a manufacturer, factory, or trading company?
A: Indeed, we have been specializing in the development, production, and operation of transformers for over 15 years. Our extensive experience and expertise ensure top-tier quality and reliability in all our products.
Q: What is your warranty?
A: We offer a comprehensive 12-month warranty on all our products, ensuring you enjoy peace of mind and assured premium quality. This extensive coverage underscores our commitment to reliability and customer satisfaction.
Q: What is your production lead time?
A: Our production lead time spans from 30 to 45 days, depending on the specific order requirements. This timeline allows us to maintain flexibility and cater efficiently to a wide range of customer needs, ensuring timely delivery without compromising on quality.
Q: What are your payment terms?
A: We offer flexible payment terms, including T/T, L/C, or negotiation-based options, designed to accommodate our diverse clientele's preferences and ensure a smooth transaction process.
Q: How does your factory ensure quality control?
A: We adhere to a rigorous 100% Quality Control (QC) inspection protocol, ensuring every product meets our stringent standards. From raw materials to the final production stages, we conduct over 10 rigorous QC inspections, guaranteeing impeccable quality and reliability at every step.
Q: Do you keep any products in stock?
A: Typically, no. All our products are custom-made according to your specific order requirements, ensuring each product is tailored precisely to your needs.
Q: What information is needed to custom make a transformer?
A: Ideally, providing technical drawings and detailed specification documents will facilitate custom manufacturing. Alternatively, thorough technical specifications outlined in our 'Quote and Order Required Information' section are sufficient. Having comprehensive technical details on hand accelerates the process, ensuring precision and a seamless, swift experience.
Q: Could you provide a catalogue and a price list for my MOQ trial order?
A: Absolutely! Our premium products, all proudly crafted in China, are showcased on our official website. Please contact us directly for additional information or specific inquiries. We are dedicated to providing exceptional service and detailed insights tailored to your unique requirements.
){kind=link}